• – Finishing top coat for Sashco’s Capture Log Stain
• – Maintenance coat for High Sierra
• – Extends life of underlying finishes
• – Ultra water repellent
• – Dries crystal clear
• – Water-based – easy to apply and clean up
• – Freeze-thaw stable

Applications

• – Check that the pigmented coat of Sashco’s Capture Log Stain is firm and set. Dry time is between 4 and 24 hours, depending on temperature and humidity.
• – Thoroughly stir Cascade before application to clean, stained, exterior logs. Use a garden sprayer or airless paint sprayer to apply and brush out runs.
• – If the wood is very porous and the sheen on the logs is uneven after applying 1 coat of Cascade, multiple coats may be required for an even appearance.
• – It is always good practice to try and protect logs as much as possible from exposure to moisture shortly after applying Cascade.

Technical Data

• Packaging

  One-gallon and five-gallon pails

• Coverage Rate

  300-600 sq. ft. per gallon, depending on surface roughness.

• Application Range

  40°F (4°C) and rising to 90° (32°C) and falling. In severe conditions (under 40°F (4°C) and/or 70%+ humidity), full rain resistance may take longer. Cover exterior walls with plastic if rainfall or snowfall is expected within 24 hours after application.

• Recommended Wet Film Thickness

  1 mil (use a gauge if in doubt)

• Dry Time

  Cascade dries to touch in 30 minutes or less in ideal weather.

• VOCs

  Less than 250g/L

• Viscosity

  Water thin

• pH

  8.5-9.5

• Density

  8-9 lbs./gal.

• Solids

  18-25%

• Odor

  Mild, sweet

• Freeze-thaw

  Passes at least 5 cycles